Oakley Reservoir Report

Last Updated: December 20, 2025

Oakley, also known as Goose Creek Reservoir, is a private water resource located in Cassia, Idaho.


°F

°F

mph

Wind

%

Humidity

Summary

Managed by the Idaho Department of Water Resources, this reservoir plays a crucial role in irrigation, with a storage capacity of 76,000 acre-feet and a surface area of 1350 acres. Built in 1916, Oakley stands at a height of 144.8 feet with a spillway width of 555 feet, ensuring controlled water release during periods of high discharge.

Despite its fair condition assessment, Oakley poses a high hazard potential, emphasizing the importance of regular inspections and risk management measures. With a very high risk rating, this reservoir requires careful monitoring and preparedness to mitigate any potential emergencies. The dam's location near Goose Creek and the Snake River adds to its significance in the region, highlighting the critical role it plays in water resource management for agriculture and local communities. Oakley serves as a testament to the intricate balance between water resource utilization and environmental preservation in the face of changing climate patterns.

Year Completed

1916

Dam Length

1070

Dam Height

144.8

River Or Stream

GOOSE CREEK SNAKE RIVER

Surface Area

1350

Hydraulic Height

139

Drainage Area

729

Nid Storage

76000

Outlet Gates

Slide (sluice gate)

Hazard Potential

High

Foundations

Rock, Soil

Nid Height

145
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
View more

Nearby Reservoirs