Lippold Lake Dam dam
Lippold Lake Dam
Lippold Lake Dam, located in New Franklin, Missouri, was completed in 1960 and serves as a private recreational facility with a primary purpose of providing leisure activities for water resource and climate enthusiasts. This earth dam, standing at a height of 21 feet, holds a storage capacity of 157 acre-feet and covers a surface area of 14 acres. While the dam is not regulated by the state and has a low hazard potential, its condition assessment is currently marked as "Not Rated."
Situated along the TR-Boone Femme river, Lippold Lake Dam offers a serene escape for visitors to enjoy fishing, boating, and other water-based activities within its vicinity. With a drainage area of 290 acres and a normal storage capacity of 20 acre-feet, the dam provides a tranquil setting for outdoor recreation while also contributing to the local ecosystem. Despite lacking a spillway type and outlet gates, the dam's structural integrity remains intact, as evidenced by its low risk assessment and hazard potential.
As a privately-owned structure, Lippold Lake Dam stands as a testament to the harmonious coexistence of human recreation and environmental preservation. While its exact inspection frequency and emergency preparedness measures are not explicitly outlined, the dam's historical significance and contribution to the local landscape make it a valuable asset for water resource and climate enthusiasts seeking a natural retreat in Howard County, Missouri.
Dam data reference
Condition Assessment
- Satisfactory
- No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
- Fair
- No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
- Poor
- A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
- Unsatisfactory
- A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
- Not Rated
- The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Hazard Potential Classification
- High
- Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
- Significant
- Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
- Low
- Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
- Undetermined
- Dams for which a downstream hazard potential has not been designated or is not provided.
Plan around the weather
Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day temperature & precipitation
Daily temperatures, snow, and rain projected over the next two weeks.
Nearby streamflow gauges
USGS streamgauges around Lippold Lake Dam -- inflows here typically show up in storage 24-72 hours later.
| Streamgauge | Discharge | View |
|---|---|---|
| Missouri River At Boonville | 82,100 cfs | → |
| Moniteau Creek Near Fayette | 336 cfs | → |
| Missouri River At Glasgow | 68,400 cfs | → |
| Hinkson Creek At Columbia | 289 cfs | → |
| Blackwater River At Blue Lick | 3,510 cfs | → |
| Lamine River Near Otterville | 1,700 cfs | → |
Make a day of it
Boat launches, lakeside camping, fishing access, and other reservoirs near Lippold Lake Dam.
Boat launches
- State Highway 41 Cooper County
- Glasgow
- I 70;Us 40 Cooper County
- Cooney Blackwater
- State Highway Kk Chariton County
- Buffalo Prairie Drive Cooper County
Track Lippold Lake Dam in the Snoflo app
Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.
About Lippold Lake Dam
Where does the data for Lippold Lake Dam come from?
Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.
How often is the report updated?
NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.
What does the Low hazard rating mean?
The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.
What's "% of normal"?
The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).
Can I get alerts when storage crosses a threshold?
Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.
Other water bodies near here
Snoflo-tracked reservoirs and dams within driving distance of Lippold Lake Dam.