Dam Report

Ellis Lake No. 2 Dam dam

Ohio, USA Tributary To Porcupine Creek Hazard Significant
Today high
--
Tonight low
--
Dam height
25ft
Hazard rating
Significant
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Ellis Lake No. 2 Dam -- None dam
Ellis Lake No. 2 Dam None · Tributary To Porcupine Creek
About this dam

Ellis Lake No. 2 Dam

Ellis Lake No. 2 Dam, located in Tiffin, Ohio, was completed in 1955 and serves as a vital water resource for recreation purposes in the area. This private-owned Earth dam stands at a height of 24.7 feet and has a storage capacity of 74.4 acre-feet. The dam spans 270 feet in length and covers a surface area of 6.6 acres, with a drainage area of 0.07 square miles.

Managed by the Department of Natural Resources in Ohio, Ellis Lake No. 2 Dam poses a significant hazard potential, although it was assessed to be in fair condition as of June 2018. The dam is subject to regular inspections, with the last one taking place in June 2018. With a normal storage capacity of 44.9 acre-feet, the dam plays a crucial role in managing water resources in the region and contributes to the overall environmental landscape, including the tributary to Porcupine Creek.

For water resource and climate enthusiasts, Ellis Lake No. 2 Dam stands out as a key infrastructure supporting recreational activities while also highlighting the importance of dam maintenance and inspection to ensure safety and water management efficiency. Its presence in Wyandot County, Ohio, reflects the intricate balance between human-made structures and natural ecosystems, underscoring the need for sustainable water resource management practices in the face of changing climate conditions.

StateNone
River / streamTributary To Porcupine Creek
NID IDOH02660
Owner typePrivate
Primary purposeRecreation
Dam typeEarth
Year built1955
Dam height25 ft
Dam length270 ft
Max storage74 AF
Normal storage45 AF
Surface area6.6 ac
Drainage area0.1 sq mi
Hazard potentialSignificant
ConditionFair
Last inspectionThu, 28 Jun 2018 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Ellis Lake No. 2 Dam -- inflows here typically show up in storage 24-72 hours later.

Track Ellis Lake No. 2 Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Ellis Lake No. 2 Dam

Where does the data for Ellis Lake No. 2 Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Significant hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

More reservoirs

Other water bodies near here

Snoflo-tracked reservoirs and dams within driving distance of Ellis Lake No. 2 Dam.

Premium feature

Favorites and alerts are part of Snoflo Premium. Save reservoirs, set storage thresholds, and get push notifications when conditions cross.

Upgrade to Premium Not now
{# FAVORITE-LIMIT MODAL — fires when a non-premium user hits the 3-favorite cap. Mirrors the iOS PremiumGateSheet's .bookmarkLimit case: same copy direction (limit reached → unlimited with Premium), same primary CTA shape. Triggered from toggle_fave (pre-flight) and the 403 error handler. #} {# ALERTS-IN-APP MODAL — opened from the Account dropdown's "Alerts" link. Push-notification alerts (snow / flow / buoy / ski) are managed in the iOS app because they require APNs + device tokens; the webapp has no equivalent surface, so the right thing to do is point users at the App Store. Mirrors the per-gauge #sf-cp-alerts-modal popup on recChildFlow.html. #}