Dam Report

Williams Reservoir dam

Ohio, USA Honey Run Hazard High
Today high
--
Tonight low
--
Dam height
53ft
Hazard rating
High
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Williams Reservoir -- None dam
Williams Reservoir None · Honey Run
About this dam

Williams Reservoir

Williams Reservoir, located in Lima, Ohio, is a vital water supply for the local community managed by the Department of Natural Resources. Constructed in 2012 by BBCM Engineering, this Earth dam stands at 53 feet high and spans 18,936 feet in length, with a storage capacity of 18,682 acre-feet. With a surface area of 426.5 acres and a drainage area of 0.71 square miles, the reservoir plays a crucial role in providing water for the region.

Despite its high hazard potential, Williams Reservoir has been deemed to be in satisfactory condition during its last assessment in 2017. The dam's Emergency Action Plan, last revised in 2017, ensures that necessary measures are in place to mitigate risks and respond promptly in case of emergencies. With regular inspections every five years, the reservoir remains a reliable source of water supply for the community, meeting state regulations and enforcement criteria.

Situated along the Honey Run river, Williams Reservoir not only serves as a water supply source but also contributes to the overall water management and climate resilience efforts in the region. As a key infrastructure asset in Allen County, Ohio, this dam plays a crucial role in ensuring water security and resource sustainability, making it a significant landmark for water resource and climate enthusiasts.

StateNone
River / streamHoney Run
NID IDOH03174
Owner typeLocal Government
Primary purposeWater Supply
Dam typeEarth
Year built2012
Dam height53 ft
Dam length18,936 ft
Max storage18,682 AF
Normal storage16,534 AF
Surface area426.5 ac
Drainage area0.7 sq mi
Hazard potentialHigh
ConditionSatisfactory
Last inspectionTue, 06 Jun 2017 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Williams Reservoir -- inflows here typically show up in storage 24-72 hours later.

Track Williams Reservoir in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Williams Reservoir

Where does the data for Williams Reservoir come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the High hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

More reservoirs

Other water bodies near here

Snoflo-tracked reservoirs and dams within driving distance of Williams Reservoir.

Premium feature

Favorites and alerts are part of Snoflo Premium. Save reservoirs, set storage thresholds, and get push notifications when conditions cross.

Upgrade to Premium Not now
🔔

Manage alerts in the Snoflo app

Custom alerts are configured in the iOS app -- favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

Open App Store