Lake White Dam Reservoir Report

Last Updated: December 29, 2025

Lake White Dam, located in Pike, Ohio, is a state-owned earth dam completed in 1935 by the Ohio Department of Highways for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

The dam stands at a height of 39 feet and spans 4200 feet, creating a reservoir with a storage capacity of 7633 acre-feet and a surface area of 400 acres. The dam is situated on Pee Pee Creek and is regulated by the Department of Natural Resources, with regular state inspections and enforcement to ensure its safety and compliance with regulations.

Despite its recreational benefits, Lake White Dam is classified as having a high hazard potential and a poor condition assessment as of the last inspection in 2019. With an inspection frequency of 5 years, the dam's emergency action plan was last revised in 2019 to meet guidelines for potential risks. The dam has a maximum discharge capacity of 8064 cubic feet per second, indicating its critical role in flood control and water resource management in the region. As water resource and climate enthusiasts, it is crucial to monitor and advocate for the maintenance and safety of infrastructure like Lake White Dam to safeguard both the environment and surrounding communities.

Year Completed

1935

Dam Length

4200

Dam Height

39

River Or Stream

PEE PEE CREEK

Primary Dam Type

Earth

Surface Area

400

Drainage Area

35.1

Nid Storage

7633

Hazard Potential

High

Nid Height

39
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.