Beaver Creek Near Hinsdale Flow Report
As of August 27, 2026, Beaver Creek Near Hinsdale is flowing at 51 cfs with a gage height of 2.92 ft, rising 18% over the past 24 hours. Source: USGS gauge #06167500, refreshed throughout the day.
Beaver Creek Near Hinsdale at a glance
Live reading, 10-day trend, and the key gauge stats — how Beaver Creek Near Hinsdale is running right now.
Beaver Creek Near Hinsdale is flowing at 51 cfs, with the water sitting 2.92 ft at the gage. Flow is up 18% since yesterday — a rising hydrograph.
This is USGS gauge #06167500 in Montana. Over the past 10 days the average has been 50 cfs, peaking at 65 cfs.
For real-time updates and historical context, see the realtime view or the historical comparison. Browse other gauges in the Montana flow report, or open Beaver Creek Near Hinsdale on the interactive map.
Streamgage details
Historical Data
Streamflow Forecast
Over the next 5 days, Beaver Creek Near Hinsdale Mt is expected to recede from today's 50 cfs, toward roughly 39 cfs by 2026-09-01 (likely range 9-165 cfs) -- drier than normal for the date.
Powered by PULSE — Snoflo’s forecast engine, trained on this gauge’s full record of storms, snowmelt, and dry spells.
Forecast vs seasonal normal
Engineering Data
Flow-duration statistics and observed peak-flow context computed from this gauge’s complete daily record (USGS #06167500).
Flow-duration & observed peak context
Estimate flows at an ungauged site
Drainage-area ratio transfer from this gauge . Most reliable for hydrologically similar sites in the same watershed with area ratios between roughly 0.5 and 1.5.
Percentiles are flow-duration values computed from this gauge’s observed daily record as archived by Snoflo. Return periods are Weibull plotting-position estimates from observed annual maxima, provided as general reference context only. Always verify against official USGS NWIS records. Part of Snoflo for Engineering.
How does this compare to past years?
Year-over-year overlay, annual peak discharge, the full distribution of daily flows on record, and the gauge's rating curve.
Weather Forecast
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day forecast
Daily temperatures, snow, and rain projected over the next two weeks.
Beaver Creek Near Hinsdale
The creek's main tributary is Coal Creek, and it flows into the Milk River. In the summer, the flow decreases due to less snowmelt, while in the winter, it increases due to precipitation. The creek has no major dams, but beavers play a significant role in shaping the hydrology. The beavers create dams, which slow the water flow, resulting in the formation of ponds and wetlands. Additionally, beavers improve water quality by trapping sediment and pollutants. The Beaver Creek supports a diverse range of aquatic flora and fauna, including rainbow trout, cutthroat trout, and waterfowl.
Nearby streamflow levels
Cross-check Beaver Creek Near Hinsdale's discharge against nearby gauges to spot whether the change here is local or regional.
| Gauge | Streamflow |
|---|---|
| Beaver Creek Near Hinsdale Mount | 51 cfs |
| Milk River At Juneberg Bridge Near Saco Mount | 216 cfs |
| Milk River At Tampico Mount | 72 cfs |
| Beaver Creek Below Guston Coulee Near Saco Mount | 19 cfs |
| Milk River At Malta Mount | 171 cfs |
| Rock Creek Below Horse Creek Near Int Bndry | 0 cfs |
Nearby snowpack data
Snowpack at SNOTEL stations near Beaver Creek Near Hinsdale. Spring snowmelt is the dominant driver of streamflow in mountain basins -- a deep snowpack upstream means more runoff later in the season.
| SNOTEL station | Snowpack |
|---|---|
| Glasgow | 0 in |
| Glasgow Wfo | 0 in |
| Opheim 4s | 0 in |
River levels & flood safety
- Read the level before you go
- A river that's runnable at one flow can be deadly at another. Check current discharge and gage height — like the values shown above — against the flood-stage thresholds, and remember levels can spike fast after rain or a dam release.
- Respect cold water
- Snowmelt rivers run cold even in summer. Sudden immersion triggers cold-water shock and saps strength within minutes. Wear a PFD, dress for the water temperature (not the air), and never wade or paddle alone.
- Watch for swiftwater hazards
- Strainers (downed trees), undercut rocks, and low-head dams are the deadliest features on moving water. High, fast, muddy water hides them. If in doubt, scout from shore and portage.
- Mind flash floods & releases
- Narrow canyons can flood from a storm miles upstream, and dam-controlled reaches can rise without warning. Know the forecast, the release schedule, and your exit before you launch.
Track Beaver Creek Near Hinsdale in the Snoflo app
Save this gauge as a favorite, set push alerts when streamflow crosses a threshold (e.g. "alert me when Beaver Creek Near Hinsdale crosses 5,000 cfs"), and Snoflo's iOS app will push the moment USGS reports the crossing.
About Beaver Creek Near Hinsdale
What is the Beaver Creek Near Hinsdale flow rate right now?
As of August 27, 2026, Beaver Creek Near Hinsdale is flowing at 51 cfs. The live value, gage height, and 24-hour trend are shown at the top of this page.
Is the Beaver Creek Near Hinsdale running high or low right now?
Check the percent of median figure on this page: above 100% means Beaver Creek Near Hinsdale is running higher than normal for the date, below 100% means lower. The 24-hour trend shows whether it's rising or falling.
Where does the streamflow data for Beaver Creek Near Hinsdale come from?
Discharge, gage height, and water temperature come directly from the USGS streamflow gauge 06167500. Snoflo refreshes the time series throughout the day. Forecasts come from the NOAA / yr.no feed Snoflo's iOS app uses.
How often is the report updated?
USGS gauges report continuously (typically every 15 minutes). Snoflo pulls fresh values throughout the day — look for the "as of" timestamp on the streamflow hero card.
What's the difference between discharge and gage height?
Discharge (cubic feet per second, or cfs) is the volume of water flowing past the gauge each second. Gage height is how high the water sits at the gauge (feet). They're related by a rating curve specific to each gauge — higher water means more flow, but the exact ratio depends on channel shape.
How is "percent of median" calculated?
Today's discharge is compared to the historical median discharge on this calendar day across the gauge's full record. 100% = right on median; 200% = a very high year; 30% = a drought-level low.
What are flood stages, and is this river safe right now?
Flood stages are NWS-defined gage-height thresholds — Action, Minor, Moderate, Major — marking when nearby roads or floodplains start to be affected. "Safe" depends on your activity and skill: a level that's a fun paddle for an expert can be lethal for a wader. Always check the current level against the thresholds above and the safety links, and when in doubt, stay off the water.
Can I get alerts when Beaver Creek Near Hinsdale rises?
Yes — flow alerts are managed in the Snoflo iOS app. Favorite this gauge, set a streamflow threshold (e.g. "alert me when discharge crosses 5,000 cfs"), and you'll get a push the moment USGS reports the crossing.
Create a free account, or sign in.
Get the free Beaver Creek Near Hinsdale report — flow alerts, favorites, and history & forecasts, plus the free iPhone app.