Burge Lake Dam Reservoir Report

Last Updated: December 5, 2025

Burge Lake Dam, located in the Hebron Church Community in Clarke, Alabama, stands as a significant water resource with a primary purpose of recreation.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1958, this earth dam boasts a hydraulic height of 25 feet and a structural height of 28 feet, with a total length of 340 feet. The dam has a storage capacity of 60 acre-feet, providing essential water management for the surrounding area.

With a maximum discharge of 1275 cubic feet per second, Burge Lake Dam plays a crucial role in flood control and water release management. Even though the dam is not state-regulated, its hazard potential is considered significant, highlighting the importance of regular inspections and maintenance. While the dam's condition is currently "Not Rated," its impact on the local environment and community underscores the need for continued monitoring and risk management measures.

As a notable feature in the region, Burge Lake Dam serves as a vital component in water resource management and climate resilience efforts. Its role in providing recreational opportunities while also ensuring water security highlights the complex interplay between human infrastructure and natural ecosystems. As enthusiasts of water resources and climate considerations, staying informed about the status and condition of Burge Lake Dam is essential for understanding the broader implications of water management in the area.

Year Completed

1958

Dam Length

340

River Or Stream

JACKSON CREEK

Primary Dam Type

Earth

Hydraulic Height

25

Nid Storage

60

Structural Height

28

Hazard Potential

Significant

Nid Height

28
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.