Nash Dam Reservoir Report

Last Updated: December 5, 2025

Nash Dam, located in East Winburn, Alabama on TR Shoal Creek, was completed in 1968 and serves primarily for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

The dam is privately owned and has a low hazard potential with a structural height of 33 feet and a hydraulic height of 29 feet. The dam has a storage capacity of 104 acre-feet, with a maximum discharge of 750 cubic feet per second.

Despite being unregulated by the state, Nash Dam provides essential recreational opportunities for the local community and visitors. The dam has not been rated for its condition assessment, but it meets guidelines for emergency action plans. With its picturesque location and potential for outdoor activities, Nash Dam is a valuable asset for water resource and climate enthusiasts looking to explore the natural beauty of Shelby County, Alabama.

Overall, Nash Dam stands as a tranquil oasis in the heart of Alabama, offering a peaceful retreat for those seeking to connect with nature and enjoy the beauty of TR Shoal Creek. Its low hazard potential and recreational focus make it a safe and enjoyable destination for outdoor enthusiasts and nature lovers alike.

Year Completed

1968

Dam Length

200

River Or Stream

TR SHOAL CREEK

Primary Dam Type

Earth

Hydraulic Height

29

Nid Storage

104

Structural Height

33

Hazard Potential

Low

Nid Height

33
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.