J D Phillips Lake Dam Reservoir Report

Last Updated: December 5, 2025

J D Phillips Lake Dam, located in Thomasville South, Clarke, Alabama, is a privately owned earth dam completed in 1975 for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

With a maximum storage capacity of 56 acre-feet and a normal storage of 53 acre-feet, the dam stands at a hydraulic height of 20 feet and a structural height of 22 feet. The dam spans 345 feet along TR-Bassett Creek and has a significant hazard potential, although its condition assessment is currently not rated.

The dam, managed by the Mobile District of the US Army Corps of Engineers, has not been inspected recently and lacks an emergency action plan. Despite being non-federally regulated, the dam's risk assessment and management measures are not specified. In the event of an emergency, the lack of an updated EAP and inundation maps raises concerns about the safety and preparedness of the surrounding community. For water resource and climate enthusiasts, the J D Phillips Lake Dam presents an intriguing case study in private dam ownership and the need for comprehensive safety protocols in the face of potential hazards.

Year Completed

1975

Dam Length

345

River Or Stream

TR-BASSETT CREEK

Primary Dam Type

Earth

Hydraulic Height

20

Nid Storage

56

Structural Height

22

Hazard Potential

Significant

Nid Height

22
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.