Phillips Reservoir Report

Last Updated: December 6, 2025

Phillips is a privately-owned recreational dam located in Chambers, Alabama, along the TR Moores Creek.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1958, this earth dam stands at a hydraulic height of 27 feet and a structural height of 31 feet, with a length of 450 feet. The dam has a storage capacity of 130 acre-feet and a maximum discharge of 624 cubic feet per second.

Despite its low hazard potential, Phillips has not been rated for its condition assessment. The dam does not fall under state jurisdiction, permitting, inspection, or enforcement, as it is privately owned. The primary purpose of Phillips is for recreation, making it a popular spot for outdoor enthusiasts to enjoy activities such as fishing, boating, and picnicking.

Although Phillips may not be heavily regulated or monitored, its importance as a recreational resource for the local community cannot be understated. With its serene surroundings and ample storage capacity, the dam provides a tranquil escape for visitors seeking a peaceful retreat in the heart of Alabama's natural beauty.

Year Completed

1958

Dam Length

450

River Or Stream

TR MOORES CREEK

Primary Dam Type

Earth

Hydraulic Height

27

Nid Storage

130

Structural Height

31

Hazard Potential

Low

Nid Height

31
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.