Putah Diversion Reservoir Report

Last Updated: December 5, 2025

Putah Diversion, also known as Lake Solano, is a federal water supply structure located in Yolo County, California.


°F

°F

mph

Wind

%

Humidity

Summary

Managed by the Bureau of Reclamation, this concrete gravity dam was completed in 1957 and serves as a crucial water source for the region. With a height of 29 feet and a storage capacity of 720 acre-feet, Putah Diversion plays a significant role in regulating water flow along Putah Creek.

The dam's primary purpose is water supply, providing essential resources for agricultural and residential use. Despite its low hazard potential and moderate risk assessment, the condition assessment of Putah Diversion is currently not available. Regular inspections by the Bureau of Reclamation ensure the structure's safety and functionality, with an inspection frequency of 6 years. While it lacks certain emergency preparedness measures, the dam remains a key component in managing water resources in the area.

Overall, Putah Diversion stands as a vital infrastructure piece in the region's water management system. As climate change continues to impact water availability and quality, structures like Putah Diversion play a crucial role in ensuring a reliable water supply for both human consumption and ecosystem sustainability along Putah Creek.

Year Completed

1957

Dam Length

910

Dam Height

16

River Or Stream

PUTAH CREEK

Primary Dam Type

Concrete

Surface Area

110

Hydraulic Height

23

Drainage Area

40

Nid Storage

720

Structural Height

29

Hazard Potential

Low

Nid Height

29
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.