Calispell Creek Dike And Pump Plant Reservoir Report

Last Updated: December 5, 2025

The Calispell Creek Dike and Pump Plant is a vital infrastructure in Pend Oreille, Washington, designed for hydroelectric purposes.


°F

°F

mph

Wind

%

Humidity

Summary

Owned by a public utility, this facility serves to regulate water levels and harness energy from the flowing creek. With a dam height of 28 feet and a storage capacity of 36 acre-feet, it plays a crucial role in managing water resources in the region.

Managed by the Federal Energy Regulatory Commission, the Calispell Creek Dike and Pump Plant has a high hazard potential due to its location and function. Despite its high risk assessment, the condition assessment is not available, highlighting the need for regular inspections and maintenance to ensure its structural integrity. The Emergency Action Plan (EAP) for this facility was last revised in April 2020, indicating a proactive approach to emergency preparedness in the event of a crisis.

Water resource and climate enthusiasts will be fascinated by the intricate design and functionality of the Calispell Creek Dike and Pump Plant. This facility not only contributes to the production of clean energy but also plays a crucial role in flood control and water management in the region. With its high hazard potential and risk assessment, it underscores the importance of proper maintenance and emergency preparedness to ensure the safety and efficiency of this essential infrastructure.

Dam Length

408

Dam Height

28

Surface Area

2.4

Nid Storage

36

Hazard Potential

High

Nid Height

28
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.