Hoover Lake Reservoir Report

Last Updated: December 5, 2025

Hoover Lake, located in Kingman, Kansas, is a privately owned recreational lake that was completed in 1995.


°F

°F

mph

Wind

%

Humidity

Summary

With a maximum storage capacity of 456 acre-feet and a normal storage level of 213.6 acre-feet, this Earth-type dam stretches 625 feet in length and stands at a height of 29.6 feet. The lake covers a surface area of 27.44 acres and is fed by Smoots Creek.

Managed by the Kansas Department of Agriculture, Hoover Lake is classified as having a low hazard potential and has not been rated in terms of condition assessment. While it does not have a spillway, the lake does have a spillway width of 140 feet. Despite not having any associated structures or outlet gates, Hoover Lake serves as a popular spot for recreational activities such as fishing, boating, and swimming in the Waterloo area.

Although Hoover Lake has not been inspected since October 1990, it meets state regulations and is regularly permitted, inspected, and enforced by the appropriate authorities. With its picturesque setting and ample opportunities for outdoor enjoyment, Hoover Lake remains a valuable water resource for the local community and a haven for water resource and climate enthusiasts alike.

Year Completed

1995

Dam Length

625

Dam Height

29.6

River Or Stream

SMOOTS CREEK-TR

Primary Dam Type

Earth

Surface Area

27.44

Drainage Area

1.4

Nid Storage

456

Outlet Gates

None

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

30
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.