Ledford Pond Dam Reservoir Report

Last Updated: December 5, 2025

Ledford Pond Dam in Clements, Maryland, serves as a crucial infrastructure for fish and wildlife preservation, in addition to fire protection and small-scale aquatic activities.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1975 by the USDA NRCS, this earth dam stands at a height of 30 feet and stretches across a length of 750 feet, with a capacity to hold a maximum of 47.5 acre-feet of water. Situated on the St Clement Creek-TR, the dam's purpose extends beyond mere water containment, contributing significantly to the local ecosystem's health and balance.

Despite its vital role, Ledford Pond Dam faces challenges in terms of its structural integrity, as recent assessments have deemed its condition as poor. With a significant hazard potential and a moderate risk level, it is essential for state regulatory agencies like MD Dam Safety to conduct regular inspections and enforce necessary repairs. The dam's location in St. Mary's County, Maryland, underlines the need for heightened awareness and proactive measures to ensure the safety and sustainability of this essential water resource in the face of potential climate-related risks and emergencies.

Year Completed

1975

Dam Length

750

Dam Height

30

River Or Stream

St Clement Creek-TR

Primary Dam Type

Earth

Surface Area

11.9

Drainage Area

0.99

Nid Storage

77

Hazard Potential

Significant

Foundations

Soil

Nid Height

30
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.