Platte River Trib Watershed Dam 2-A Reservoir Report
Last Updated: December 16, 2025
Platte River Trib Watershed Dam 2-A, located in Worth, Missouri, is an Earth dam designed by the USDA NRCS for grade stabilization purposes on the TR-Platte River.
°F
°F
mph
Wind
%
Humidity
Summary
Completed in 1960, this dam stands at 27 feet high and stretches 505 feet in length, with a storage capacity of 168 acre-feet. The dam serves to mitigate erosion and protect the surrounding area from potential flooding events, with a low hazard potential and a moderate risk assessment.
Managed by local government authorities, this dam does not fall under state regulatory jurisdiction and does not have a designated emergency action plan or inspection schedule. With an uncontrolled spillway and no outlet gates, the dam's primary purpose remains grade stabilization, providing essential protection for the watershed and surrounding community. Although its condition is currently assessed as "Not Rated," the dam continues to play a crucial role in water resource management and climate resilience efforts in the region.
Year Completed |
1960 |
Dam Length |
505 |
Dam Height |
27 |
River Or Stream |
TR-PLATTE RIVER |
Primary Dam Type |
Earth |
Surface Area |
1 |
Hydraulic Height |
27 |
Drainage Area |
32 |
Nid Storage |
168 |
Structural Height |
27 |
Outlet Gates |
None |
Hazard Potential |
Low |
Foundations |
Soil |
Nid Height |
27 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Platte River Trib Watershed Dam 2-A