Thompson Lake Dam Reservoir Report

Last Updated: December 13, 2025

Thompson Lake Dam, located in Amazonia, Missouri, is a private-owned structure primarily designed for flood risk reduction.


°F

°F

mph

Wind

%

Humidity

Summary

Constructed in 1936, this earth-type dam stands at a height of 30 feet and has a storage capacity of 112 acre-feet. With a normal storage capacity of 51 acre-feet, the dam serves multiple purposes including fire protection, stock or small fish pond, and recreation in addition to flood risk reduction.

Situated on the TR-Caples Creek, Thompson Lake Dam covers a surface area of 7 acres and drains an area of 180 acres. Despite lacking a spillway type and having a high hazard potential, the dam's condition assessment is currently not rated. With no state regulation or inspection, the dam's emergency action plan status is unknown. As a notable feature in the region, Thompson Lake Dam plays a crucial role in managing water resources and mitigating flood risks in the area.

For water resource and climate enthusiasts, Thompson Lake Dam presents an intriguing case study of a privately-owned structure with a significant impact on the local ecosystem. The dam's historical significance, multiple purposes, and high hazard potential make it a subject of interest for further research and analysis. As a key component in the flood risk reduction strategy for the area, understanding the condition and management of Thompson Lake Dam is essential for ensuring the safety and sustainability of the surrounding community and environment.

Year Completed

1936

Dam Height

30

River Or Stream

TR-CAPLES CREEK

Primary Dam Type

Earth

Surface Area

7

Drainage Area

180

Nid Storage

112

Structural Height

30

Hazard Potential

High

Foundations

Unlisted/Unknown

Nid Height

30
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.