Richardson Lake Dam Reservoir Report

Last Updated: December 11, 2025

Richardson Lake Dam in Callaway, Missouri, is a privately owned structure completed in 1963 primarily for fire protection, stock, and small fish pond purposes.


°F

°F

mph

Wind

%

Humidity

Summary

Located on TR Stinson Creek, the earth dam stands at 28 feet in height and has a storage capacity of 225 acre-feet. The dam serves a low hazard potential and has not been rated for condition assessment.

Despite being a privately owned dam, Richardson Lake Dam does not fall under state regulation or jurisdiction, with no state permitting, inspection, or enforcement requirements. The St. Louis District of the US Army Corps of Engineers does not have any involvement in the operation, design, or funding of this structure. The dam's purpose extends to recreation and it covers a surface area of 15 acres within a drainage area of 210 acres.

Water resource and climate enthusiasts may find Richardson Lake Dam intriguing due to its historical significance in the region and its multiple purposes beyond water storage. With a low hazard potential and minimal oversight from regulatory agencies, the dam represents a unique case study in private dam ownership and management. The dam's location on TR Stinson Creek also makes it a valuable asset for fire protection and local wildlife conservation efforts in the area.

Year Completed

1963

Dam Height

28

River Or Stream

TR STINSON CREEK

Primary Dam Type

Earth

Surface Area

15

Drainage Area

210

Nid Storage

225

Structural Height

28

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

28
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.