Lakeview Estates Dam Reservoir Report

Last Updated: December 16, 2025

Lakeview Estates Dam, located in Warren, Missouri, was completed in 1950 and serves as a private recreational spot for water resource and climate enthusiasts.


°F

°F

mph

Wind

%

Humidity

Summary

This Earth-type dam stands at a height of 32 feet and has a storage capacity of 428 acre-feet, with a normal storage level of 192 acre-feet. The dam is situated on a tributary to Big Creek and covers a surface area of 25 acres within its drainage area of 160 acres.

Despite its age, Lakeview Estates Dam has a high hazard potential due to its condition being not rated and lacking recent inspection data since May 1979. The dam's emergency action plan status and risk assessment measures are also not specified. The dam's ownership falls under private entities, with no state or federal agency involvement in regulation, permitting, inspection, or enforcement. With its picturesque location and recreational purpose, Lakeview Estates Dam is a significant landmark for water enthusiasts in the region, emphasizing the importance of proper maintenance and risk management for such structures to ensure public safety and environmental protection.

Year Completed

1950

Dam Height

32

River Or Stream

TRIBUTARY TO BIG CREEK

Primary Dam Type

Earth

Surface Area

25

Drainage Area

160

Nid Storage

428

Structural Height

32

Hazard Potential

High

Foundations

Unlisted/Unknown

Nid Height

32
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.