Phillips Lake Dam dam
Phillips Lake Dam
Phillips Lake Dam, located in Pleasant Green, Missouri, was completed in 1976 with a primary purpose of irrigation. This private dam, standing at a height of 30 feet, serves multiple purposes including fire protection, stock maintenance, irrigation, and recreation. With a storage capacity of 80 acre-feet and a normal storage level of 46 acre-feet, the dam plays a vital role in managing water resources in the area.
Situated on the TR-Johnson Br-Lamine River, Phillips Lake Dam is classified as an earth dam with a buttress core type. Despite its low hazard potential, the dam's condition assessment has not been rated. The dam has not been inspected recently and does not have an emergency action plan in place. The surrounding area has a surface area of 5 acres and a drainage area of 15 acres, highlighting the importance of this water resource for the local community and ecosystem.
As a key infrastructure for water management, Phillips Lake Dam contributes to the overall sustainability and resilience of the region. Its role in providing water for irrigation, fire protection, and recreation underscores the significance of maintaining and monitoring its condition to ensure the safety and well-being of the surrounding environment. For water resource and climate enthusiasts, understanding the intricacies of this dam can offer valuable insights into the challenges and opportunities associated with managing water resources in a changing climate.
Dam data reference
Condition Assessment
- Satisfactory
- No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
- Fair
- No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
- Poor
- A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
- Unsatisfactory
- A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
- Not Rated
- The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Hazard Potential Classification
- High
- Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
- Significant
- Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
- Low
- Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
- Undetermined
- Dams for which a downstream hazard potential has not been designated or is not provided.
Plan around the weather
Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day temperature & precipitation
Daily temperatures, snow, and rain projected over the next two weeks.
Nearby streamflow gauges
USGS streamgauges around Phillips Lake Dam -- inflows here typically show up in storage 24-72 hours later.
| Streamgauge | Discharge | View |
|---|---|---|
| Lamine River Near Otterville | 117 cfs | → |
| Blackwater River At Blue Lick | 220 cfs | → |
| Missouri River At Boonville | 41,800 cfs | → |
| Missouri River At Glasgow | 44,500 cfs | → |
| Moniteau Creek Near Fayette | 6 cfs | → |
| Hinkson Creek At Columbia | 9 cfs | → |
Make a day of it
Boat launches, lakeside camping, fishing access, and other reservoirs near Phillips Lake Dam.
Boat launches
- Swinging Bridge Drive Cooper County
- Buffalo Prairie Drive Cooper County
- I 70;Us 40 Cooper County
- State Highway 41 Cooper County
- Cooney Blackwater
- County Road K Saline County
Track Phillips Lake Dam in the Snoflo app
Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.
About Phillips Lake Dam
Where does the data for Phillips Lake Dam come from?
Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.
How often is the report updated?
NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.
What does the Low hazard rating mean?
The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.
What's "% of normal"?
The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).
Can I get alerts when storage crosses a threshold?
Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.
Other water bodies near here
Snoflo-tracked reservoirs and dams within driving distance of Phillips Lake Dam.