Campbell Lake Dam Reservoir Report
Last Updated: December 19, 2025
Campbell Lake Dam, located in Rochport, Missouri, was completed in 1977 and serves primarily for irrigation purposes.
°F
°F
mph
Wind
%
Humidity
Summary
This private earth dam stands at a height of 30 feet and has a storage capacity of 64 acre-feet. Situated on the TR-MONITEAU CREEK, the dam covers a surface area of 4 acres and has a drainage area of 15 square miles. Despite being categorized as having a low hazard potential, the dam's condition assessment remains unrated.
With its buttress core type and unlisted/unknown foundation, Campbell Lake Dam has not been subject to state regulation, inspection, or enforcement. The dam's emergency action plan status, risk assessment, and inundation maps preparation are also marked as not completed. However, for water resource and climate enthusiasts, the dam's presence offers an opportunity to study the interplay between water management for irrigation and recreation, especially given its location within the scenic Howard County, Missouri. As a structure vital for water resource management, understanding Campbell Lake Dam's design and functionality can provide valuable insights into sustainable water use practices in the region.
Year Completed |
1977 |
Dam Height |
30 |
River Or Stream |
TR-MONITEAU CREEK |
Primary Dam Type |
Earth |
Surface Area |
4 |
Drainage Area |
15 |
Nid Storage |
64 |
Structural Height |
30 |
Hazard Potential |
Low |
Foundations |
Unlisted/Unknown |
Nid Height |
30 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Campbell Lake Dam