Mathews Lake Dam Reservoir Report

Last Updated: December 8, 2025

Mathews Lake Dam, located in Rhineland, Missouri, was completed in 1960 and serves multiple purposes, including fire protection, stock, and as a small fish pond.


°F

°F

mph

Wind

%

Humidity

Summary

This private Earth dam stands at a height of 25 feet and has a storage capacity of 147 acre-feet, with a normal storage of 66 acre-feet. The dam is situated on TR Little Tavern Creek and covers a surface area of 11 acres within a drainage area of 55 square miles.

Despite being privately owned, Mathews Lake Dam is not regulated by the state and has a low hazard potential. The dam has not been inspected or assessed for condition, and there is no Emergency Action Plan (EAP) in place. While it is primarily used for recreational purposes, the dam's lack of regulatory oversight and maintenance raises concerns about its long-term safety and functionality for water resource and climate enthusiasts who value the sustainable management of water infrastructure.

Year Completed

1960

Dam Height

25

River Or Stream

TR LITTLE TAVERN CREEK

Primary Dam Type

Earth

Surface Area

11

Drainage Area

55

Nid Storage

147

Structural Height

25

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

25
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.