B & C Subdivision Dam Reservoir Report

Last Updated: December 16, 2025

The B & C Subdivision Dam, located in Mcbaine, Missouri, along the Perche Creek, was completed in 1989 and serves primarily for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

This private earth dam, with a height of 34 feet, has a storage capacity of 691 acre-feet and covers a surface area of 38 acres. The dam is considered to have a high hazard potential, although its condition assessment has not been rated yet.

Despite not being regulated or inspected by state authorities, the B & C Subdivision Dam is a key feature for water resource and climate enthusiasts in the area. Its location within the St. Louis District and its unique design as a buttress earth dam make it an interesting structure for those interested in hydraulic engineering and dam construction. The dam's proximity to the Perche Creek provides an opportunity for studying the impact of dams on local ecosystems and waterways.

Year Completed

1989

Dam Height

34

River Or Stream

PERCHE CREEK

Primary Dam Type

Earth

Surface Area

38

Drainage Area

280

Nid Storage

691

Structural Height

34

Hazard Potential

High

Foundations

Unlisted/Unknown

Nid Height

34
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.