Burns Lake Dam Reservoir Report

Last Updated: December 24, 2025

Burns Lake Dam, located in Stockton, Missouri, was completed in 1945 and serves multiple purposes including fire protection, stock, and small fish pond recreation.


°F

°F

mph

Wind

%

Humidity

Summary

The dam, with a height of 20 feet and a storage capacity of 160 acre-feet, is primarily used for maintaining water levels for these purposes. Situated on Conner Brook, the dam is privately owned and not regulated by the state, with a low hazard potential and a condition assessment that has not been rated.

This earth dam with a buttress core type spans an area of 15 acres, with a drainage area of 970 square miles. Despite its low hazard potential, Burns Lake Dam plays a crucial role in water resource management in the region. The dam's location in Cedar County, Missouri, makes it a vital component of the local ecosystem and a key feature for climate enthusiasts interested in the impact of dams on water resources and the environment.

As an essential structure for water management and conservation, Burns Lake Dam provides a case study for understanding the role of smaller dams in maintaining water levels and supporting various activities in the region. The dam's historical significance, private ownership, and multiple purposes make it a fascinating subject for those interested in the intersection of water resources, climate, and infrastructure development.

Year Completed

1945

Dam Height

20

River Or Stream

CONNER BROOK

Primary Dam Type

Earth

Surface Area

15

Drainage Area

970

Nid Storage

160

Structural Height

20

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

20
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.