Kingston No. 1 Dam Reservoir Report
Last Updated: April 1, 2026
Kingston No.
Summary
1 Dam, located in Bliss, Missouri, is a privately owned structure with a primary purpose of tailings storage. Built in 1967, this earth dam stands at a height of 85 feet and spans 1475 feet in length. The dam has a storage capacity of 1700 acre-feet and serves the Mineral Fork of the Big River.
Despite being privately owned, the dam is regulated by the Missouri Dam and Reservoir Safety Program, ensuring that it meets necessary safety standards. The dam has a high hazard potential due to its location and condition assessment, rated as satisfactory as of 2007. With a spillway width of 56 feet and a maximum discharge of 1800 cubic feet per second, the dam is equipped to handle potential flooding events.
Water resource and climate enthusiasts will find Kingston No. 1 Dam a fascinating structure to study, given its historical significance, engineering design, and role in managing water resources in the area. Its location within the Kansas City District of the US Army Corps of Engineers adds another layer of interest for those passionate about water management and infrastructure.
°F
°F
mph
Wind
%
Humidity
15-Day Weather Outlook
Year Completed |
1967 |
Dam Length |
1475 |
Dam Height |
85 |
River Or Stream |
TR-MINERAL FK-BIG RIVER |
Surface Area |
60 |
Drainage Area |
430 |
Nid Storage |
1700 |
Structural Height |
85 |
Outlet Gates |
None |
Hazard Potential |
High |
Foundations |
Unlisted/Unknown |
Nid Height |
85 |
Seasonal Comparison
5-Day Hourly Forecast Detail
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Kingston No. 1 Dam