West Fork Big Creek Dam B-125 Reservoir Report

Last Updated: December 18, 2025

West Fork Big Creek Dam B-125, located in Harrison, Missouri, serves as a crucial flood risk reduction structure along the West Fork Big Creek.


°F

°F

mph

Wind

%

Humidity

Summary

Constructed in 1988 by the USDA NRCS, this earth dam stands at a height of 30 feet and stretches 400 feet in length, with a capacity to store up to 79 acre-feet of water. The dam's primary purpose is flood risk reduction, and it plays a key role in protecting the surrounding area from potential inundation during heavy rainfall events.

With a low hazard potential and moderate risk assessment rating, West Fork Big Creek Dam B-125 is deemed to be in satisfactory condition, although not officially rated. The dam features an uncontrolled spillway with a width of 48 feet, and has no outlet gates or associated structures. Despite its relatively small surface area of 12 acres, the dam covers a large drainage area of 460 square miles, highlighting its importance in managing water flow and reducing flood risks in the region. Water resource and climate enthusiasts will find West Fork Big Creek Dam B-125 to be a fascinating structure that plays a vital role in safeguarding the local community from potential water-related disasters.

Year Completed

1988

Dam Length

400

Dam Height

28

River Or Stream

WEST FORK BIG CREEK

Primary Dam Type

Earth

Surface Area

12

Hydraulic Height

28

Drainage Area

460

Nid Storage

79

Structural Height

30

Outlet Gates

None

Hazard Potential

Low

Foundations

Soil

Nid Height

30
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.