Romine Dam Reservoir Report
Nearby: Crist Dam East Yellow Creek W- 28
Last Updated: December 12, 2025
Romine Dam, located in Winigan, Missouri on the Mussel Fork River, was completed in 1996 for the primary purpose of grade stabilization.
°F
°F
mph
Wind
%
Humidity
Summary
This private Earth dam stands at a height of 26.5 feet with a hydraulic height of 23 feet and a structural height of 24 feet. With a storage capacity of 32 acre-feet and a surface area of 3 acres, Romine Dam plays a crucial role in managing water resources in the area.
Despite being classified as low hazard potential and not rated for condition assessment, Romine Dam serves as a key infrastructure for the community with a moderate risk assessment. The dam features an uncontrolled spillway with a width of 10 feet and no outlet gates. While it does not fall under state jurisdiction for regulation or inspection, the dam continues to provide essential grade stabilization and water management functions for the surrounding area. With its stone core and soil foundation, Romine Dam remains a vital asset for water resource and climate enthusiasts in the region.
Year Completed |
1996 |
Dam Length |
321 |
Dam Height |
26.5 |
River Or Stream |
MUSSEL FORK |
Primary Dam Type |
Earth |
Surface Area |
3 |
Hydraulic Height |
23 |
Drainage Area |
32 |
Nid Storage |
32 |
Structural Height |
24 |
Outlet Gates |
None |
Hazard Potential |
Low |
Foundations |
Soil |
Nid Height |
27 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Romine Dam