Shelton Dam Reservoir Report
Nearby: Western Dam Sidwell Dam
Last Updated: December 7, 2025
Shelton Dam, located in Queen City, Missouri, serves as a crucial structure for grade stabilization along the TR-Chariton River.
°F
°F
mph
Wind
%
Humidity
Summary
Completed in 1996, this private-owned earth dam stands at a height of 31 feet, with a hydraulic height of 29 feet and a structural height of 30 feet. With a normal storage capacity of 19 acre-feet and a maximum storage of 28 acre-feet, Shelton Dam covers a surface area of 4 acres and drains an area of 110 acres.
Despite its low hazard potential, Shelton Dam is considered to have a moderate risk level, with a risk assessment rating of 3. The dam features an uncontrolled spillway with a width of 10 feet, and no outlet gates are present. While the condition of Shelton Dam is currently not rated, with no recent inspection date available, it plays a vital role in managing water resources in the region. For water resource and climate enthusiasts, Shelton Dam stands as a testament to the importance of infrastructure for maintaining environmental stability and water management in the face of changing climate patterns.
Year Completed |
1996 |
Dam Length |
325 |
Dam Height |
31 |
River Or Stream |
TR-CHARITON RIVER |
Primary Dam Type |
Earth |
Surface Area |
4 |
Hydraulic Height |
29 |
Drainage Area |
110 |
Nid Storage |
28 |
Structural Height |
30 |
Outlet Gates |
None |
Hazard Potential |
Low |
Foundations |
Soil |
Nid Height |
31 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Shelton Dam