Brooks Dam Reservoir Report

Last Updated: December 17, 2025

Brooks Dam, located in MIDDLETOWN, Missouri, serves as a crucial structure for grade stabilization along the CLLIVER RIVER.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1997, this Earth dam stands at a height of 21.2 feet and has a maximum storage capacity of 93 acre-feet. With a normal storage capacity of 58 acre-feet and a surface area of 3.3 acres, Brooks Dam plays a vital role in managing water resources in the region.

Despite its low hazard potential, Brooks Dam is classified as having a moderate risk level (3). However, the dam's condition assessment has not been rated, and it lacks an Emergency Action Plan (EAP) meeting guidelines. With a spillway width of 20 feet and a maximum discharge of 12 cubic feet per second, the dam's risk management measures and inundation maps remain unclear. As a private-owned structure, Brooks Dam underscores the importance of ongoing monitoring and maintenance to ensure the safety and efficiency of water resource management in the area.

In the oversight of the Kansas City District, Brooks Dam's role in grade stabilization highlights the intersection of water resource management and climate resilience. As water enthusiasts and climate advocates, it is crucial to recognize the significance of structures like Brooks Dam in safeguarding our waterways and communities. By staying informed and engaged in the maintenance and risk assessment of dams like Brooks Dam, we can contribute to sustainable water resource management and climate adaptation efforts in Audrain County, Missouri.

Year Completed

1997

Dam Length

700

Dam Height

21.2

River Or Stream

CLLIVER RIVER

Primary Dam Type

Earth

Surface Area

3.3

Hydraulic Height

18

Drainage Area

134.4

Nid Storage

93

Structural Height

20

Outlet Gates

None

Hazard Potential

Low

Foundations

Soil

Nid Height

21
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.