Moniteau Creek Ws Dam M- 17 Reservoir Report

Last Updated: December 19, 2025

Moniteau Creek WS Dam M- 17, located in Howard County, Missouri, was completed in 1999 by the USDA NRCS with the primary purpose of flood risk reduction along the Moniteau Creek.


°F

°F

mph

Wind

%

Humidity

Summary

This earth dam stands at a height of 28 feet with a structural height of 32 feet and a length of 500 feet. It has a storage capacity of 104 acre-feet and serves a drainage area of 215 square miles.

The dam features a stone core and a soil foundation, with an uncontrolled spillway that is 20 feet wide. Despite its low hazard potential and moderate risk assessment, it has not been rated for condition assessment. The dam has not been modified since its completion and does not have any associated locks or outlet gates. The inspection frequency is set at 5 years, with the last inspection conducted in October 1999.

Overall, Moniteau Creek WS Dam M- 17 plays a crucial role in mitigating flood risks in the area, providing protection to the surrounding community. As a key infrastructure managed by the local government, its location in the Kansas City District ensures effective monitoring and maintenance. Water resource and climate enthusiasts will find this dam an interesting case study in flood risk reduction efforts in the region.

Year Completed

1999

Dam Length

500

Dam Height

28

River Or Stream

TR-MONITEAU CREEK

Primary Dam Type

Earth

Surface Area

15

Hydraulic Height

27

Drainage Area

215

Nid Storage

104

Structural Height

32

Outlet Gates

None

Hazard Potential

Low

Foundations

Soil

Nid Height

32
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.