Moniteau Creek Ws Dam M- 64 Reservoir Report

Last Updated: December 19, 2025

Moniteau Creek WS Dam M- 64, located in Howard County, Missouri, is a flood risk reduction structure designed by USDA NRCS and completed in 2007.


°F

°F

mph

Wind

%

Humidity

Summary

This earth dam stands at a height of 26 feet and has a structural height of 31 feet, with a length of 350 feet. It serves the primary purpose of flood risk reduction for the Moniteau Creek watershed, with a storage capacity of 139 acre-feet and a drainage area of 160 acres.

The dam features an uncontrolled spillway with a width of 40 feet and is classified as having a low hazard potential. Despite not being regulated by the state, the structure has a moderate risk assessment rating of 3. The dam is not currently rated for condition assessment and has not been inspected in recent years. It is operated by the local government and serves as a vital component in managing flood risks in the region. For water resource and climate enthusiasts, Moniteau Creek WS Dam M- 64 offers a fascinating insight into flood control infrastructure and its role in protecting communities and ecosystems from potential water-related disasters.

Year Completed

2007

Dam Length

350

Dam Height

26

River Or Stream

TR-MONITEAU CREEK

Primary Dam Type

Earth

Surface Area

1

Hydraulic Height

26

Drainage Area

160

Nid Storage

139

Structural Height

31

Outlet Gates

Uncontrolled

Hazard Potential

Low

Foundations

Soil

Nid Height

31
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.