Cascade Lake Dam Reservoir Report

Last Updated: December 6, 2025

Cascade Lake Dam, located in Bellvale, New York, is a concrete structure completed in 1946 for the primary purpose of recreation.


°F

°F

mph

Wind

%

Humidity

Summary

This dam stands at a height of 16 feet and has a length of 167 feet, providing a storage capacity of 37 acre-feet. With a normal storage level of 25 acre-feet, the dam regulates Long House Creek and covers a surface area of 4 acres within its drainage area of 8.2 square miles.

Managed by the local government and regulated by the New York State Department of Environmental Conservation, Cascade Lake Dam has a significant hazard potential but is currently in satisfactory condition according to the latest inspection in February 2019. Its spillway, with a width of 122 feet, is uncontrolled, allowing for a maximum discharge of 1820 cubic feet per second. The dam's risk assessment is moderate, and while an emergency action plan exists, it has not been updated recently. With its picturesque location and recreational purpose, Cascade Lake Dam serves as a vital resource for the community and visitors alike.

Year Completed

1946

Dam Length

167

Dam Height

16

River Or Stream

LONG HOUSE CREEK

Primary Dam Type

Concrete

Surface Area

4

Drainage Area

8.2

Nid Storage

37

Hazard Potential

Significant

Nid Height

16
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.