Ilion Reservoir #2 Dam Reservoir Report

Last Updated: December 6, 2025

Ilion Reservoir #2 Dam, located in Ilion, New York, is a crucial structure owned by the local government and regulated by the New York State Department of Environmental Conservation.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 1903, this Earth-type dam stands at a height of 60 feet and spans 800 feet in length. Its primary purpose is to serve as a water supply source, with a storage capacity of 251 acre-feet and a normal storage level of 199 acre-feet.

The dam, situated on Steele Creek, poses a high hazard potential and has a moderate risk assessment rating. Despite not being condition-rated, it undergoes regular inspections every two years to ensure safety and compliance. The spillway, of uncontrolled type and with a width of 3 feet, helps manage water discharge during peak flow events. With a surface area of 12 acres and a drainage area of 0.03 square miles, the reservoir plays a vital role in water management and supply for the local community. Located in Herkimer County, the dam is a key component of the region's water infrastructure, serving as a critical resource for residents and businesses alike.

Year Completed

1903

Dam Length

800

Dam Height

60

River Or Stream

STEELE CREEK

Primary Dam Type

Earth

Surface Area

12

Drainage Area

0.03

Nid Storage

251

Hazard Potential

High

Nid Height

60
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.