Dam Report

Jamesville Water District Dam dam

New York, USA Rush Creek Hazard Low
Today high
--
Tonight low
--
Dam height
35ft
Hazard rating
Low
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Jamesville Water District Dam -- None dam
Jamesville Water District Dam None · Rush Creek
About this dam

Jamesville Water District Dam

Located in Jamesville, New York, the Jamesville Water District Dam stands as a vital structure serving the community as a primary source of water supply. Constructed in 1927, this earth dam boasts a height of 35 feet and a length of 600 feet, with a storage capacity of 110 acre-feet. The dam sits on Rush Creek, with a drainage area of 1.5 square miles and a surface area of 6 acres, providing essential water resources to the area.

Managed by a private entity, the Jamesville Water District Dam is regulated and inspected by the New York State Department of Environmental Conservation to ensure compliance with safety standards. Despite having a low hazard potential, the dam is rated as moderate risk level (3), indicating the need for ongoing risk management measures. With a spillway width of 60 feet and a maximum discharge capacity of 1000 cubic feet per second, the dam is equipped to handle excess water flow and protect the surrounding community from potential flooding events.

For water resource and climate enthusiasts, the Jamesville Water District Dam serves as a noteworthy example of infrastructure designed to support essential water supply needs while managing associated risks. With its long history of service and regulated maintenance, this dam underscores the importance of proactive management to safeguard water resources and ensure the well-being of local communities in New York.

StateNone
River / streamRush Creek
NID IDNY00802
Owner typePrivate
Primary purposeWater Supply
Dam typeEarth
Year built1927
Dam height35 ft
Dam length600 ft
Max storage110 AF
Normal storage96 AF
Surface area6.0 ac
Drainage area1.5 sq mi
Hazard potentialLow
ConditionNot Rated
Last inspectionWed, 10 Jun 2020 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Jamesville Water District Dam -- inflows here typically show up in storage 24-72 hours later.

Track Jamesville Water District Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Jamesville Water District Dam

Where does the data for Jamesville Water District Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Low hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.