Kazens Pond Dam Reservoir Report

Last Updated: December 6, 2025

Kazens Pond Dam, located in Cochecton Center, Sullivan County, New York, was completed in 1950 for the primary purpose of recreation.


°F

°F

mph

Wind

%

Humidity

Summary

This private dam on Nebraska Brook stands at a height of 10 feet and has a length of 260 feet, with a storage capacity of 104 acre-feet. The dam has a surface area of 32 acres and a maximum discharge of 170 cubic feet per second, with an uncontrolled spillway width of 11 feet.

Although the hazard potential of Kazens Pond Dam is rated as low, its condition assessment is currently not rated. The last inspection of the dam was conducted in October 2011, and it is regulated by the New York State Department of Environmental Conservation. The dam poses a moderate risk, with no emergency action plan in place, and it has not been assigned a Dam Safety Action Classification (DSAC) date. Despite its age, the dam continues to provide recreational opportunities for the local community.

Water resource and climate enthusiasts interested in Kazens Pond Dam will find it an intriguing structure with a rich history dating back to the mid-20th century. The dam's location in a picturesque setting and its role in providing recreational activities make it a valuable asset to the surrounding area. With ongoing state regulation and inspections, the dam remains a safe and functional part of the local water infrastructure, adding to the natural beauty and ecosystem of the region.

Year Completed

1950

Dam Length

260

Dam Height

10

River Or Stream

NEBRASKA BROOK

Primary Dam Type

Earth

Surface Area

32

Nid Storage

104

Hazard Potential

Low

Nid Height

10
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.