Twin Dam #1 dam
Twin Dam #1
Twin Dam #1, located in Rosebud, Montana, is a private earth dam designed by the USDA NRCS and completed in 1959 for the primary purpose of irrigation. Situated on Coyote Creek, this dam stands at a height of 15 feet and has a length of 200 feet, providing a maximum storage capacity of 67 acre-feet. With a drainage area of 8.44 square miles and a maximum discharge of 1000 cubic feet per second, Twin Dam #1 plays a crucial role in water resource management in the region.
Managed by the DNRC, Twin Dam #1 has been deemed to have a low hazard potential and is currently rated as "Not Rated" in terms of its condition assessment. While the dam has not undergone recent inspections or assessments, it is maintained in compliance with state regulations, including permitting, inspection, and enforcement. With its strategic location and efficient design, Twin Dam #1 serves as a vital infrastructure for supporting agricultural activities and ensuring water availability in the area.
Despite its age, Twin Dam #1 continues to fulfill its intended purpose of irrigation, contributing to the sustainable use of water resources in Montana. As a key component of the local water management system, this dam underscores the importance of proper infrastructure maintenance and regulatory oversight in safeguarding against potential risks and ensuring the resilience of water resources in the face of climate variability and change.
Dam data reference
Condition Assessment
- Satisfactory
- No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
- Fair
- No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
- Poor
- A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
- Unsatisfactory
- A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
- Not Rated
- The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Hazard Potential Classification
- High
- Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
- Significant
- Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
- Low
- Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
- Undetermined
- Dams for which a downstream hazard potential has not been designated or is not provided.
Plan around the weather
Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day temperature & precipitation
Daily temperatures, snow, and rain projected over the next two weeks.
Nearby streamflow gauges
USGS streamgauges around Twin Dam #1 -- inflows here typically show up in storage 24-72 hours later.
| Streamgauge | Discharge | View |
|---|---|---|
| Yellowstone River At Forsyth Mt | 10,500 cfs | → |
| Yellowstone River At Miles City Mt | 10,600 cfs | → |
| Musselshell River At Mosby Mt | 80 cfs | → |
| Tongue River At Miles City Mt | 61 cfs | → |
| Bighorn River Ab Tullock Cr Nr Bighorn Mt | 2,040 cfs | → |
| Flatwillow Creek Near Mosby Mt | 18 cfs | → |
Make a day of it
Boat launches, lakeside camping, fishing access, and other reservoirs near Twin Dam #1.
Track Twin Dam #1 in the Snoflo app
Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.
About Twin Dam #1
Where does the data for Twin Dam #1 come from?
Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.
How often is the report updated?
NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.
What does the Low hazard rating mean?
The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.
What's "% of normal"?
The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).
Can I get alerts when storage crosses a threshold?
Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.
Other water bodies near here
Snoflo-tracked reservoirs and dams within driving distance of Twin Dam #1.