Dam Report

Montie Stewart dam

Oklahoma, USA Unnamed Tributary To Otter Creek Hazard Low
Today high
--
Tonight low
--
Dam height
23ft
Hazard rating
Low
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Montie Stewart -- None dam
Montie Stewart None · Unnamed Tributary To Otter Creek
About this dam

Montie Stewart

Montie Stewart is a privately owned water supply structure located in Kingfisher, Oklahoma, along an unnamed tributary to Otter Creek. Designed by Converse Surveying and Engineering Inc., this dam stands at a height of 30 feet with a hydraulic height of 23 feet. With a storage capacity of 275 acre-feet and a surface area of 15.1 acres, Montie Stewart serves the primary purpose of water supply for the area.

Despite its low hazard potential and moderate risk assessment, the condition of Montie Stewart has not been rated. It is regulated by the Oklahoma Water Resources Board (OWRB) and undergoes regular inspections every 5 years. The dam features an uncontrolled spillway with a width of 6 feet and a maximum discharge of 88 cubic feet per second. Although it has not been modified in recent years, Montie Stewart remains a crucial infrastructure for water resource management in the region.

With its stone core and soil foundation, Montie Stewart plays a vital role in water supply management in Kingfisher, Oklahoma. While it has not been assessed for condition, the dam is subject to state regulation, inspection, and enforcement to ensure its continued safe operation. As a key structure along the tributary to Otter Creek, Montie Stewart serves as a valuable resource for the community, highlighting the importance of sustainable water resource management in the face of changing climate conditions.

StateNone
River / streamUnnamed Tributary To Otter Creek
NID IDOK30524
Owner typePrivate
Primary purposeWater Supply
Dam height23 ft
Dam length2,025 ft
Max storage275 AF
Normal storage177 AF
Surface area15.1 ac
Drainage area0.1 sq mi
Hazard potentialLow
ConditionNot Rated

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Montie Stewart -- inflows here typically show up in storage 24-72 hours later.

Track Montie Stewart in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Montie Stewart

Where does the data for Montie Stewart come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Low hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

More reservoirs

Other water bodies near here

Snoflo-tracked reservoirs and dams within driving distance of Montie Stewart.