Dam Report

Dr John Keith Dam 1 dam

South Carolina, USA Pauline Creek Hazard Low
Today high
--
Tonight low
--
Dam height
33ft
Hazard rating
Low
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Dr John Keith Dam 1 -- None dam
Dr John Keith Dam 1 None · Pauline Creek
About this dam

Dr John Keith Dam 1

Dr. John Keith Dam 1, located in Spartanburg, South Carolina, was completed in 1988 by the USDA NRCS and serves as a vital structure for debris control along Pauline Creek. This private-owned Earth dam stands at a height of 33 feet and has a length of 360 feet, with a storage capacity of 231 acre-feet. The dam, primarily designed for debris control, also supports recreational activities and covers a surface area of 17.5 acres.

Managed by the SC DHEC, Dr. John Keith Dam 1 has a low hazard potential and is assessed to be in fair condition as of the last inspection in 2017. With uncontrolled spillways and outlets, the dam presents moderate risk, but is regularly inspected every 5 years to ensure its safety and integrity. The dam's importance in managing water resources and protecting the surrounding area from debris highlights its significance in the region's water infrastructure.

Overall, Dr. John Keith Dam 1 plays a crucial role in maintaining the water quality of Pauline Creek and providing recreational opportunities for the community. As a part of the broader water management system in South Carolina, this dam stands as a testament to the importance of sustainable water resource practices and the need for regular maintenance and inspection to ensure public safety and environmental protection.

StateNone
River / streamPauline Creek
NID IDSC02593
Owner typePrivate
Primary purposeDebris Control
Dam typeEarth
Year built1988
Dam height33 ft
Dam length360 ft
Max storage231 AF
Normal storage123 AF
Surface area17.5 ac
Hazard potentialLow
ConditionFair
Last inspectionThu, 15 Jun 2017 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Dr John Keith Dam 1 -- inflows here typically show up in storage 24-72 hours later.

Track Dr John Keith Dam 1 in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Dr John Keith Dam 1

Where does the data for Dr John Keith Dam 1 come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Low hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.