Dam Report

Thompson Creek #4 dam

Tennessee, USA Upper Thompson Creek Hazard Significant
Today high
--
Tonight low
--
Dam height
28ft
Hazard rating
Significant
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Thompson Creek #4 -- None dam
Thompson Creek #4 None · Upper Thompson Creek
About this dam

Thompson Creek #4

Thompson Creek #4, also known as Thompson Creek Dam 4, is a state-owned structure located in ORE SPRINGS, Weakley County, Tennessee. Built in 1960 by USDA NRCS, this Earth-type dam stands at a structural height of 28.3 feet and serves the primary purpose of flood risk reduction. Situated on the UPPER THOMPSON CREEK, this dam has a hydraulic height of 21.3 feet and a storage capacity of 3242 acre-feet, with a normal storage level of 1470 acre-feet.

Managed by the TENNESSEE SAFE DAMS PROGRAM, Thompson Creek #4 is regulated, permitted, inspected, and enforced by the state of Tennessee. Despite its significant hazard potential, the dam is currently in satisfactory condition according to the last inspection conducted in December 2019. With a moderate risk assessment rating of 3, Thompson Creek #4 poses a manageable level of risk, and no Emergency Action Plan (EAP) has been prepared as of now.

This dam not only contributes to flood risk reduction but also provides benefits for fish and wildlife habitat and recreational activities in the area. Serving as a vital infrastructure for water resource management in Weakley County, Thompson Creek #4 stands as a testament to the collaborative efforts between state and federal agencies in ensuring the safety and functionality of important water structures in Tennessee.

StateNone
River / streamUpper Thompson Creek
NID IDTN18306
Owner typeState
Primary purposeFlood Risk Reduction
Dam typeEarth
Year built1960
Dam length1,307 ft
Max storage3,242 AF
Normal storage1,470 AF
Surface area183.0 ac
Drainage area3.5 sq mi
Hazard potentialSignificant
ConditionSatisfactory
Last inspectionTue, 03 Dec 2019 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Thompson Creek #4 -- inflows here typically show up in storage 24-72 hours later.

Around the water

Make a day of it

Boat launches, lakeside camping, fishing access, and other reservoirs near Thompson Creek #4.

Track Thompson Creek #4 in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Thompson Creek #4

Where does the data for Thompson Creek #4 come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Significant hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

More reservoirs

Other water bodies near here

Snoflo-tracked reservoirs and dams within driving distance of Thompson Creek #4.