Dam Report

Cement Plant Dam dam

Texas, USA Cottonwood Creek Hazard Not Available
Today high
--
Tonight low
--
Dam height
38ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Cement Plant Dam -- None dam
Cement Plant Dam None · Cottonwood Creek
About this dam

Cement Plant Dam

Cement Plant Dam, located in Ellis, Texas, along Cottonwood Creek, stands as a testament to engineering excellence since its completion in 1961 by FREESE AND NICHOLS. This earth dam, with a height of 38 feet and a length of 760 feet, serves multiple purposes, including water storage and flood control. The dam has a normal storage capacity of 128 acre-feet and a surface area of 38.2 acres, making it a crucial resource for the region.

Managed by a private entity, Cement Plant Dam is regulated by the Texas Commission on Environmental Quality (TCEQ) and undergoes regular inspections to ensure its structural integrity. The dam boasts a satisfactory condition assessment as of April 2021, with emergency action plans in place for any potential risks. With a spillway width of 25 feet and outlet gates for controlled water release, the dam plays a vital role in managing water flow and protecting downstream areas from flooding events.

As a key feature in the local water infrastructure, Cement Plant Dam contributes to water resource management and climate resilience efforts in the region. Its strategic location and design make it a critical asset for ensuring water availability and flood protection, showcasing the intersection of engineering ingenuity and environmental stewardship in safeguarding communities and ecosystems against water-related challenges.

StateNone
River / streamCottonwood Creek
NID IDTX01313
Owner typePrivate
Primary purposeOther
Dam typeEarth
Year built1961
Dam height38 ft
Dam length760 ft
Max storage384 AF
Normal storage128 AF
Surface area38.2 ac
Drainage area1.1 sq mi
Hazard potentialNot Available
ConditionSatisfactory
Last inspectionWed, 31 May 2017 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Cement Plant Dam -- inflows here typically show up in storage 24-72 hours later.

Track Cement Plant Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Cement Plant Dam

Where does the data for Cement Plant Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.