Dam Report

Munday Park Dam dam

Texas, USA Payne Creek Hazard Not Available
Today high
--
Tonight low
--
Dam height
17ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Munday Park Dam -- None dam
Munday Park Dam None · Payne Creek
About this dam

Munday Park Dam

Munday Park Dam, located in Knox, Texas, is a local government-owned earth dam with a primary purpose of recreation. Built in 1941 by designer Frank Parsley, the dam stands at a height of 17 feet and stretches 1200 feet in length, creating a storage capacity of 560 acre-feet. Situated on Payne Creek and regulated by the Texas Commission on Environmental Quality, the dam serves as a vital resource for water recreation activities in the area.

Despite its high hazard potential and lack of a spillway, Munday Park Dam has not been rated for its condition assessment, posing a potential risk to the surrounding environment. With no designated emergency action plan or updated inundation maps, the dam's risk management measures remain unclear. However, its strategic location in a recreational park and the absence of any associated structures or locks make it a popular spot for water enthusiasts seeking outdoor adventures.

Water resource and climate enthusiasts interested in Munday Park Dam will find its historical significance and recreational value appealing. With a rich history dating back to the early 1940s and a capacity to store 560 acre-feet of water, the dam offers opportunities for outdoor activities and relaxation. However, the lack of a spillway and updated risk management measures highlight the importance of ongoing monitoring and maintenance to ensure the safety of both the dam and surrounding areas.

StateNone
River / streamPayne Creek
NID IDTX01422
Owner typeLocal Government
Primary purposeRecreation
Dam typeEarth
Year built1941
Dam height17 ft
Dam length1,200 ft
Max storage560 AF
Normal storage150 AF
Hazard potentialNot Available
ConditionNot Rated

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Munday Park Dam -- inflows here typically show up in storage 24-72 hours later.

Track Munday Park Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Munday Park Dam

Where does the data for Munday Park Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.