Dam Report

Clayton Lake Dam dam

Texas, USA Tr-Little Salt Creek Hazard Not Available
Today high
--
Tonight low
--
Dam height
20ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Clayton Lake Dam -- None dam
Clayton Lake Dam None · Tr-Little Salt Creek
About this dam

Clayton Lake Dam

Clayton Lake Dam, located in Young County, Texas, is a private earth dam built in 1964 with a primary purpose classified as 'Other'. Standing at a height of 20 feet and a length of 1500 feet, the dam has a storage capacity of 272 acre-feet and a surface area of 17 acres. It is situated along TR-Little Salt Creek and is under the jurisdiction of the state with permitting and inspection requirements in place.

This dam, with a buttress core type and no spillway, poses a high risk according to the hazard potential assessment. While the condition of the dam is currently not rated, it is essential for water resource and climate enthusiasts to monitor its maintenance and any potential modifications due to its risk level. With no federal involvement in ownership, funding, or regulatory aspects, the responsibility lies with the private owner to ensure the safety and integrity of Clayton Lake Dam.

As a point of interest for those interested in water resource management and climate resilience, Clayton Lake Dam serves as a case study in the importance of proper dam maintenance and risk management in safeguarding communities and ecosystems from potential hazards. Its location along TR-Little Salt Creek adds to its significance in the local water infrastructure network and highlights the need for regular inspections and adherence to safety guidelines to prevent any adverse impacts on the surrounding area.

StateNone
River / streamTr-Little Salt Creek
NID IDTX05522
Owner typePrivate
Primary purposeOther
Dam typeEarth
Year built1964
Dam height20 ft
Dam length1,500 ft
Max storage272 AF
Normal storage102 AF
Surface area17.0 ac
Hazard potentialNot Available
ConditionNot Rated

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Clayton Lake Dam -- inflows here typically show up in storage 24-72 hours later.

Track Clayton Lake Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Clayton Lake Dam

Where does the data for Clayton Lake Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.