Mitchell Lake Dam Reservoir Report

Last Updated: December 5, 2025

Located in Wake County, North Carolina, Mitchell Lake Dam, also known as Mitchell Pond Dam, was completed in 1964 and serves primarily for irrigation purposes.


°F

°F

mph

Wind

%

Humidity

Summary

Owned privately, this earth dam stands at a structural height of 17 feet with a length of 150 feet. With a normal storage capacity of 86 acre-feet and a maximum storage of 105 acre-feet, the dam covers a surface area of 11 acres and is situated on the Little River-Tr.

Despite being in fair condition as of the last assessment in February 2019, Mitchell Lake Dam has a high hazard potential. It is regulated by the North Carolina Department of Environmental Quality and Land Resources Dam Safety Program, with state jurisdiction and permitting in place. Its last inspection date was in February 2019, with a frequency of inspections set at 2.

The dam area in Bagley, North Carolina, is known for its recreational opportunities as well, attracting water resource and climate enthusiasts. With its close proximity to Wilmington District, Mitchell Lake Dam stands as a significant structure contributing to the water resource management in the region.

Year Completed

1964

Dam Length

150

River Or Stream

Little River-Tr

Primary Dam Type

Earth

Surface Area

11

Nid Storage

105

Structural Height

17

Hazard Potential

High

Nid Height

17
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.