Tallywood Dam Reservoir Report

Last Updated: December 5, 2025

Tallywood Dam, located in Fayetteville, North Carolina, serves as a private recreational spot along the Branson Creek Tributary.


°F

°F

mph

Wind

%

Humidity

Summary

With a hydraulic height of 18 feet and a structural height of 23 feet, this earth dam boasts a length of 385 feet and a storage capacity of 55.2 acre-feet. The dam, regulated by the NCDEQ Dam Safety Program, is deemed to have a high hazard potential and is classified in fair condition as of the last assessment in June 2019.

Despite lacking certain details like the year of completion or specific dam volume, Tallywood Dam stands as a key point of interest for water resource and climate enthusiasts. It not only provides recreational opportunities but also showcases the intricate balance between infrastructure development and environmental stewardship. With its state-regulated status and regular inspections, the dam serves as a reminder of the importance of maintaining and monitoring our water resources to ensure both safety and sustainability for the surrounding community.

As a notable landmark in Cumberland County, Tallywood Dam underscores the need for efficient emergency preparedness and risk management measures. While it currently meets regulatory guidelines and boasts a decent safety record, continual monitoring and assessment are vital to address any potential risks or issues that may arise in the future. For enthusiasts interested in water resource management and climate resilience, Tallywood Dam serves as a microcosm of the broader challenges and opportunities in ensuring the safety and sustainability of our water infrastructure.

Dam Length

385

River Or Stream

Branson Creek Trib.

Primary Dam Type

Earth

Surface Area

6

Hydraulic Height

18

Nid Storage

55.2

Structural Height

23

Hazard Potential

High

Nid Height

23
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.