Batts Pond Dam Reservoir Report

Last Updated: December 5, 2025

Batts Pond Dam, located in Old Sparta, North Carolina, serves as a recreational area along Town Creek.


°F

°F

mph

Wind

%

Humidity

Summary

This private earth dam, completed in 1957, stands at a structural height of 20 feet with a hydraulic height of 15 feet. With a normal storage capacity of 120 acre-feet and a maximum storage of 144 acre-feet, the dam covers a surface area of 15 acres and spans 337 feet in length.

Despite its age, Batts Pond Dam is deemed to have a low hazard potential and fair condition assessment as of the last inspection in December 2017. While not regulated by the state, the dam undergoes regular inspections to ensure its integrity and safety for recreational use. With no associated structures or federal agency involvement, the dam remains under private ownership and management.

Water resource and climate enthusiasts interested in Batts Pond Dam can appreciate its historical significance and recreational value within the Wilson County landscape. As a well-maintained earth dam with a modest storage capacity, the dam provides a serene environment for outdoor activities while serving as a reminder of North Carolina's rich hydrological heritage. Despite its low hazard potential, ongoing inspections and assessments ensure the continued safety and enjoyment of this community asset along Town Creek.

Year Completed

1957

Dam Length

337

River Or Stream

Town Creek

Primary Dam Type

Earth

Surface Area

15

Hydraulic Height

15

Nid Storage

144

Structural Height

20

Hazard Potential

Low

Nid Height

20
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.