Dan River Active Secondary Ash Basin Dam Reservoir Report

Last Updated: December 6, 2025

The Dan River Active Secondary Ash Basin Dam is a critical infrastructure in Rockingham, North Carolina, designed to regulate the flow of the Dan River.


°F

°F

mph

Wind

%

Humidity

Summary

Owned by a public utility, this earth dam stands at 30 feet tall and spans a length of 2,650 feet, providing vital water resource management for the area. Completed in 1976, the dam has a surface area of 26.8 acres and is under the jurisdiction of state regulatory agencies like NCDEQ and the Dam Safety Program.

With a high hazard potential and fair condition assessment, the Dan River Active Secondary Ash Basin Dam is regularly inspected to ensure its safety and effectiveness. The dam plays a crucial role in managing water levels and protecting the surrounding communities from flood risks. Situated in Eden, North Carolina, this dam is subject to state permitting, inspection, and enforcement, highlighting the commitment to maintaining water resource infrastructure in the region. For water resource and climate enthusiasts, the Dan River Active Secondary Ash Basin Dam serves as a key component in sustainable water management practices in North Carolina.

Year Completed

1976

Dam Length

2650

River Or Stream

Dan River

Primary Dam Type

Earth

Surface Area

26.8

Structural Height

30

Hazard Potential

High

Nid Height

30
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.