Williams Dam Reservoir Report

Last Updated: December 8, 2025

Williams Dam, located in Patrick, Virginia, is a private earth dam standing at a height of 55 feet and stretching 850 feet in length.


°F

°F

mph

Wind

%

Humidity

Summary

With a storage capacity of 57 acre-feet, this dam serves multiple purposes though its primary function is yet to be specified. The dam is regulated by the Department of Conservation and Recreation in Virginia and is subject to regular inspections to ensure its safety and compliance with state standards.

Despite its significant size and storage capacity, the condition assessment of Williams Dam remains "Not Rated," with its hazard potential listed as "Undetermined." The dam's emergency action plan status, risk assessment, and management measures are also unspecified, raising questions about its preparedness in the face of potential emergencies. As a water resource and climate enthusiast, the enigmatic status of Williams Dam presents an intriguing case study in the intersection of infrastructure management and environmental stewardship, calling for further investigation and monitoring to safeguard against any potential risks or concerns.

Dam Length

850

Dam Height

55

Primary Dam Type

Earth

Surface Area

1.9

Hydraulic Height

55

Nid Storage

57

Structural Height

55

Hazard Potential

Undetermined

Nid Height

55
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.