City Of Cambridge Park Dam Reservoir Report

Last Updated: December 5, 2025

The City of Cambridge Park Dam, located in Guernsey County, Ohio, serves as a crucial recreational resource for the local community.


°F

°F

mph

Wind

%

Humidity

Summary

With a height of 16.4 feet and a length of 170 feet, this earth dam provides a storage capacity of 25.5 acre-feet. Despite its primary purpose for recreation, the dam is also state-regulated by the Department of Natural Resources, ensuring its safety and compliance with inspection and enforcement measures.

Although the City of Cambridge Park Dam offers valuable recreational opportunities, its condition assessment is rated as poor with a significant hazard potential. The last inspection in October 2017 highlighted the need for improvements to enhance its safety and resilience. With a drainage area of 0.38 square miles and a maximum discharge capacity of 536 cubic feet per second, the dam plays a crucial role in managing water resources in the area.

As water resource and climate enthusiasts, it is essential to monitor the maintenance and upgrades of dams like the City of Cambridge Park Dam to ensure their long-term sustainability and safety. By staying informed about its condition assessments, hazard potential, and regulatory oversight, we can advocate for necessary improvements to protect both the environment and the community's recreational enjoyment.

Dam Length

170

Dam Height

16.4

River Or Stream

TRIBUTARY TO LEATHERWOOD CREEK

Primary Dam Type

Earth

Surface Area

2.8

Drainage Area

0.38

Nid Storage

25.5

Hazard Potential

Significant

Nid Height

16
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.