Tiogue Lake Reservoir Report

Last Updated: December 6, 2025

Tiogue Lake in Coventry, Rhode Island, is a picturesque water resource nestled within Kent County.


°F

°F

mph

Wind

%

Humidity

Summary

The lake, created by a masonry dam completed in 1875, serves primarily for recreational purposes. With a dam height of 9 feet and a hydraulic height of 14 feet, Tiogue Lake has a storage capacity of 1468 acre-feet, providing ample space for water-based activities. The lake covers a surface area of 267 acres and has a normal storage capacity of 1335 acre-feet.

Despite its age, Tiogue Lake's dam is structurally sound, with a fair condition assessment as of October 2017. However, the dam poses a high hazard potential, reflecting the need for regular inspections and maintenance. The last inspection took place in May 2010, with a frequency of every two years. The dam's spillway width of 30 feet and maximum discharge of 210 cubic feet per second ensure proper water management in case of overflow. Overall, Tiogue Lake stands as a vital recreational and ecological resource in Rhode Island, attracting water resource and climate enthusiasts alike.

Year Completed

1875

Dam Length

1400

Dam Height

9

River Or Stream

TIOGUE RIVER

Primary Dam Type

Masonry

Surface Area

267

Hydraulic Height

14

Drainage Area

2

Nid Storage

1468

Structural Height

15

Hazard Potential

High

Nid Height

15
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.