Taylor Reservoir Report

Last Updated: December 5, 2025

Taylor, Art is a privately owned dam located in Duchesne, Utah, regulated by the Utah Division of Water Rights.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 2002, this earth dam stands at 30 feet tall with a hydraulic height of 24 feet and a length of 100 feet. It has a storage capacity of 3.7 acre-feet, serving a drainage area of 80 acres.

The dam is classified as having a significant hazard potential, although its condition assessment is currently listed as "Not Rated." Despite this, the dam undergoes inspections every two years to ensure its safety and compliance with state regulations. The dam is equipped with a spillway width of 8 feet, although details on its spillway type and other structural features are not provided.

While Taylor, Art serves a primarily "Other" purpose, its presence underscores the importance of private water resource management in the region. This site is a valuable asset for water resource and climate enthusiasts interested in understanding the infrastructure and regulatory landscape of water management in Utah.

Year Completed

2002

Dam Length

100

Primary Dam Type

Earth

Hydraulic Height

24

Drainage Area

80

Nid Storage

3.7

Structural Height

30

Hazard Potential

Significant

Nid Height

30
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.