Pearl River At Burnside flow report
As of July 13, 2026, Pearl River At Burnside is flowing at 1,000 cfs with a gage height of 5.31 ft, receding 13% over the past 24 hours. Source: USGS gauge #02481880, refreshed throughout the day.
Historical Data
Pearl River At Burnside at a glance
How Pearl River At Burnside is running right now, where it sits on the map, and the key gauge stats.
Pearl River At Burnside is flowing at 1,000 cfs, with the water sitting 5.31 ft at the gage. Flow is down 13% since yesterday as the gauge recedes.
This is USGS gauge #02481880 in Mississippi.
For real-time updates and historical context, see the realtime view or the historical comparison. Browse other gauges in the Mississippi flow report.
How does this compare to past years?
Year-over-year overlay, annual peak discharge, the full distribution of daily flows on record, and the gauge's rating curve.
Weather Forecast
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day forecast
Daily temperatures, snow, and rain projected over the next two weeks.
Pearl River At Burnside
The primary contributors to the flow of the Pearl River are rainfall and snowmelt, with occasional fluctuations due to dam releases from the Ross Barnett Reservoir. The river is also fed by several tributaries, including the Strong River, Yockanookany River, and Bogue Chitto River. Seasonally, the river experiences the highest flow during the spring, with occasional flooding in the surrounding areas. Interestingly, the Pearl River is home to several species of freshwater mussels, some of which are endangered.
Nearby streamflow levels
Cross-check Pearl River At Burnside's discharge against nearby gauges to spot whether the change here is local or regional.
| Gauge | Streamflow |
|---|---|
| Pearl River At Burnside | 1,000 cfs |
| Pearl River At Edinburg | 225 cfs |
| Pearl River Nr Carthage | 536 cfs |
| Tuscolameta Creek At Walnut Grove | 276 cfs |
| South Canal Tuscolameta Creek Nr Walnut Grove | 8 cfs |
| Yockanookany River Nr Kosciusko | 24 cfs |
Plan a trip
Reservoirs, boat launches, river runs, and fishing spots within driving distance of Pearl River At Burnside.
Boat launches
See all →
River levels & flood safety
- Read the level before you go
- A river that's runnable at one flow can be deadly at another. Check current discharge and gage height — like the values shown above — against the flood-stage thresholds, and remember levels can spike fast after rain or a dam release.
- Respect cold water
- Snowmelt rivers run cold even in summer. Sudden immersion triggers cold-water shock and saps strength within minutes. Wear a PFD, dress for the water temperature (not the air), and never wade or paddle alone.
- Watch for swiftwater hazards
- Strainers (downed trees), undercut rocks, and low-head dams are the deadliest features on moving water. High, fast, muddy water hides them. If in doubt, scout from shore and portage.
- Mind flash floods & releases
- Narrow canyons can flood from a storm miles upstream, and dam-controlled reaches can rise without warning. Know the forecast, the release schedule, and your exit before you launch.
Track Pearl River At Burnside in the Snoflo app
Save this gauge as a favorite, set push alerts when streamflow crosses a threshold (e.g. "alert me when Pearl River At Burnside crosses 5,000 cfs"), and Snoflo's iOS app will push the moment USGS reports the crossing.
About Pearl River At Burnside
Where does the streamflow data for Pearl River At Burnside come from?
Discharge, gage height, and water temperature come directly from the USGS streamflow gauge 02481880. Snoflo refreshes the time series throughout the day. Forecasts come from the NOAA / yr.no feed Snoflo's iOS app uses.
How often is the report updated?
USGS gauges report continuously (typically every 15 minutes). Snoflo pulls fresh values throughout the day — look for the "as of" timestamp on the streamflow hero card.
What's the difference between discharge and gage height?
Discharge (cubic feet per second, or cfs) is the volume of water flowing past the gauge each second. Gage height is how high the water sits at the gauge (feet). They're related by a rating curve specific to each gauge — higher water means more flow, but the exact ratio depends on channel shape.
How is "percent of median" calculated?
Today's discharge is compared to the historical median discharge on this calendar day across the gauge's full record. 100% = right on median; 200% = a very high year; 30% = a drought-level low.
What are flood stages, and is this river safe right now?
Flood stages are NWS-defined gage-height thresholds — Action, Minor, Moderate, Major — marking when nearby roads or floodplains start to be affected. "Safe" depends on your activity and skill: a level that's a fun paddle for an expert can be lethal for a wader. Always check the current level against the thresholds above and the safety links, and when in doubt, stay off the water.
Can I get alerts when Pearl River At Burnside rises?
Yes — flow alerts are managed in the Snoflo iOS app. Favorite this gauge, set a streamflow threshold (e.g. "alert me when discharge crosses 5,000 cfs"), and you'll get a push the moment USGS reports the crossing.
Access the free Pearl River At Burnside report
Create your free account to track this river — and everything else you love on the water.
- Flow alerts — get pinged the moment this river hits your range
- Save favorites — every river, lake & snowpack in one place
- Full history & forecasts — plus the free iPhone app